Czech pastes, type DpP
Diamond pastes are used for finishing operations on functional surfaces of tools, nozzles, dies, and metallographic cuts. The table below shows the values of the achievable surface roughness Ra depending on the use of the diaphragm grain size.
Grain size in microns | Ra |
1/0 - 5/3 | 0,020 - 0,040 |
3/2 - 10/7 | 0,032 - 0,063 |
10/7 - 20/14 | 0,063 - 0,100 |
14/10 - 40/28 | 0,080 - 0,160 |
Example of usage:
- Finishing operations of functional surfaces of tools, molds, nozzles, dies
- Lapping and polishing of hardened tool surfaces
- Lapping and polishing of injection and blow molds
- Lapping and polishing of cutting and bending tools
- Honing of shaped holes and holes
Composition: DSM diamond synthetic powder, graded to the required size.
Binder: serves as a lubricant and coolant. After polishing, the paste residues can be easily washed off the surface (for example with alcohol).
Packaging: we supply diamond pastes in plastic dispensers ( the syringe). The dispenser contains 5g of paste.